Polymer Bedside Cabinet – Easy Clean


  • BS 3962 Part 6: 1980 – Assessment of resistance to mechanical damage.
  • BS EN 12720:2009 – Furniture assessment of surface resistance to cold liquids.
  • BS EN 12721:2009 – Furniture assessment of surface resistance to wet heat.
  • BS EN 12722:2009 – Furniture assessment of surface resistance to dry heat.
  • BS 5852-7:2006 – Methods of the test for the assessment of the ignitability.
  • BS 4875-7:2006 – Domestic and contract storage furniture.
  • Developed as part of design Bugs Out & evaluated by the Department of Health.
  • Manufactured from recyclable polyethylene
  • Open backless design ensures that all areas are accessible, whilst surfaces allow for easy and effective cleaning.
  • Distinct Upper, Middle & Lower section
    • Upper – Nurse zone with integral rim to contain any spillages, ideally positioned for staff to use while standing
    • Middle – Patient zone provides storage area for patient use.
    • Lower – Patient zone provides shelf for washbowl, footwear, etc.
  • Drawers can be inserted from either side, allowing the cabinet to be positioned either side of the bed
  • Upper and middle drawers can be fitted with a L15 125KHz RFID lock, providing secure storage for patient medicines/property
  • 100mm polymer twin-wheel braking castors.

Cabinets with locks are supplied with one patient card, a programming card will be required per ward/directorate as per hospital policy. 

  • EBC015 – No locks (29kg)
  • EBC020 – Upper Drawer with lock (29.1kg)
  • EBC025 – Middle Drawer with lock (29.1kg)
  • EBC030 – Upper and Middle Drawers with locks (29.2kg)